Colorless oil varnish for floors. It is a resin-oil alloy on a phenolic resin (synthetic) and esterified rosin and on linseed and tung oils, diluted to the required consistency with a thinner and activated. It is clear, with acceptable slight turbidity. Dries hard, giving varnish gloss after 24 at. at a temperature of 18-22 ° C with normal air humidity. Suitable for brush work without drying out during work. The coatings are water-resistant, soda and mechanical agents; are indelible. It is used for covering wooden floors, previously primed with varnish or covered with oil paint. Colorless oil varnish for mixing with paints for interior works. It is a resin-oil alloy on a modified phenolic resin and esterified rosin as well as linseed and tung oils., diluted to the required consistency and activated. It is clear, dries up after 24 at. w temp. 18—22 ° C with normal air humidity, easy to apply with a brush without drying immediately, has the ability to mix with alkaline dyes and can be diluted with a spraying system after being diluted. Acid number at most 15. It is used as a binder to spread dry paint or oil paint in a paste and to increase the hardness of paintwork and flow properties..